Features:

Protect the engine consumption;

Extend car battery life;

Reduce Frequent startup loss.

Protect the engine, reduce frequent startup damage

After the car is started, the start and stop will be auto-matically closed, effectively preventing the damage of the engine due to frequent starting.

High Performance chip

Smart Mirco-electronics, smooth and stable, without logging.

TIPS:

In general cars, the indicator light on means OFF, and the indicator light off means ON.

NOTICE:

Please make sure your car part same as our picture, the cables can work.

If you have any question about product, please leave message to us.

Smart 451 Installation is as follows

1: Pry on the start stop switch, as shown in the following figure

2. Clamp the two clips of the start stop treasure on the two wires behind the switch, as shown in the following figure: pay attention to distinguishing colors and positions, connect the black wire clip to the brown wire, and connect the green wire clip to the brown blue wire on the right.

3. Route the red wire from under the carpet to the fuse box below the steering wheel. Find fuse 21 (blue 15A) in the fuse box. Pull out the fuse and insert the power plug in this position

4. Start the engine, wait for 15 seconds, and observe that the automatic start stop stop indicator light automatically lights up, indicating successful installation.

Packing include:

1* start stop cable

1* yellow tools